Table of Contents
Advertisement
Video settings
You can control the following video settings:
•
TV aspect ratio (4:3 or 16:9)
•
4:3 or 16:9 handling (Pan & Scan or
Letterbox)
•
Video output (S-Video or Y / Pb / Pr, that is,
S-Video or Component)
1. Press MENU on the remote control.
2. Press VOL
or VOL
3. Press CH ▼or CH ▲ until TV Setting is highlighted.
4. Press OK.
The TV Setting window appears.
5. Press CH ▼or CH ▲ until the option you want to change is highlighted.
6. Follow the on-screen help to make whatever changes are necessary.
For some options, you press OK to see a list of allowable values; for others you just enter the
number using the numeric buttons on the remote control. In some cases, you can press VOL
or VOL
to scroll through the available values.
7. Press MENU to return to the previous menu, or EXIT to return to normal viewing.
NOTE: You can also change the TV aspect setting by pressing FORMAT on the remote
control. Repeatedly pressing FORMAT steps through each available option.
Audio settings
If a channel is being broadcast in Dolby Digital, you can receive Dolby Digital by:
•
connecting a coaxial cable between the S/PDIF socket on the SRT 5020 (socket 5 in the
diagram on page 7) and the corresponding socket on your TV)
•
choosing Dolby Digital as your audio format.
until the Config option is highlighted.
•
RF channel (consult your TV user manual, if
necessary)
•
TV type (PAL, NTSC, SECAM or AUTO)
•
RF system (G, M, K or I: only available if you
choose PAL as the TV type)
19
Advertisement
Table of Contents
