Strong SRT 5020 User Manual page 33

3. The next available timer number appears by default. If you want to change that number (or
select a timer to cancel), move to the Timer Number field and press VOL
the appropriate timer (1 through to 8).
4. The Timer State field shows Enable by default. If you are cancelling the timer you chose in the
previous step, move to the Timer State field and then press VOL
from Disable to Enable. Press the SUB button (the red button) on the remote control to cancel
the timer, and ignore the rest of this procedure.
5. Press CH ▼to move to the Time Cycle field.
6. Press VOL or VOL
highlighted.
7. Press CH ▼to move to the Time Service field.
8. Press VOL or VOL
9. Press CH ▼to move to the Date field. If you want to change the default date, press OK to
display a calendar, select the date on which the timer is to be activated and press OK.
10. Press CH ▼to move to the Time field and set the time at which the timer is to be activated.
(Press VOL or VOL
remote control to change the selected digit.)
Note that the Time field will read Wakeup Time, Start Time or Sleep Time depending on the
choice you made for Time Service.
11. If you are setting a sleep timer, go to step 14 below.
12. If you are setting a wake up timer, a Channel field appears. Press CH ▼to move to the field and
then press VOL
Now go to step 14 below.
13. If you are setting a VCR Record timer, an End Time and a Channel field appear. Press CH ▼to
move to these fields in turn: enter an end time using the number keys on the remote control,
and select a channel by pressing VOL
14. Press the SUB button (the red button) on the remote control to save the timer settings.
15. Repeat from step 2 if you want to set another timer.
16. Press MENU, EXIT or EPG to return to normal viewing.
until the time cycle option you want—Once, Daily or Weekly—is
until the service you want (Sleep, Wake Up or VCR Record) is highlighted.
to move between the digits of the time and press a number key on the
or VOL until the channel you want to see at the wake up time is showing.
or VOL .
33
or VOL to choose
. The Timer State field changes