Setting Or Cancelling A Timer From The Preferences Menu - Strong SRT 5020 User Manual

Setting or cancelling a timer from the Preferences menu

1. Press MENU on the remote control.
2. If the Preference option is not highlighted, press VOL
3. Press CH ▼or CH ▲ on the remote control until Timer Setting is highlighted.
4. Press OK on the remote control.
The Timer Setting window appears.
5. Press CH ▼or CH ▲ to choose the appropriate timer (1 through to 8) and then press OK.
6. Press CH ▼to move to the Timer State field and then press VOL. If you are setting a timer, the
Timer State field changes from Disable to Enable.
If you are cancelling a timer, the Timer State field changes to Disable. You can now press the
SUB button (the red button) on the remote control and ignore the rest of this procedure.
7. Press CH ▼to move to the Time Cycle field.
8. Press VOL or VOL
highlighted.
9. Press CH ▼to move to the Time Service field.
10. Press VOL or VOL
highlighted.
11. Press CH ▼to move to the Date field. If you want to change the default date, press OK to
display a calendar, select the date on which the timer is to be activated and press OK.
12. Press CH ▼to move to the Time field and set the time at which the timer is to be activated.
(Press VOL or VOL
remote control to change the selected digit.)
Note that the Time field will read Wakeup Time, Start Time or Sleep Time depending on the
choice you made for Time Service.
13. If you are setting a sleep timer, go to step 16 below.
14. If you are setting a wake up timer, a Channel field appears. Press CH ▼to move to the field and
then press VOL
Now go to step 16 below.
15. If you are setting a VCR Record timer, an End Time and a Channel field appear. Press CH ▼to
move to these fields in turn: enter an end time using the number keys on the remote control,
and select a channel by pressing VOL
16. Press the SUB button (the red button) on the remote control to save the timer settings.
17. Repeat from step 5 if you want to set another timer.
18. Press MENU to return to the Preferences menu or EXIT to return to normal viewing.
until the time cycle option you want—Once, Daily or Weekly—is
until the time service option you want—Sleep, Wake Up or VCR Record—is
to move between the digits of the time and press a number key on the
or VOL until the channel you want to see at the wake up time is showing.
or VOL
or VOL .
34
on the remote control until it is.