Part Identification Chart - Weider Club C650 Bench User Manual

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses below each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts
may have been preattached. If a part is not in the parts bag, check to see if it has been preattached.
1/2" Nylon Locknut (94)
M10 Nylon Locknut (34)
M8 Nylon Locknut (17)
M10 Washer (35)
M10 Small Washer (95)
M8 Washer (60)
M4 x 16mm Screw (36)
M6 x 16mm Screw (29)
28mm Spacer (91)
17mm Spacer (89)
10mm Spacer (21)
M6 Washer (78)
5
M10 x 19mm Bolt (102)
M6 x 38mm Bolt (99)
M10 x 45mm Bolt (111)
M8 x 43mm Shoulder Bolt (107)
M10 x 48mm Bolt (33)
M8 x 58mm Bolt (75)
M10 x 58mm Carriage Bolt (77)