Weider 9000 User Manual page 10

14. Wrap the Butterfly Cable (32) around a "V"-Pulley
(25). Attach the Pulley and a Large Cable Trap
(27) to the bracket on the Centre Upright (5) with
an M10 x 60mm Bolt (47) and an M10 Nylon
Locknut (49).
15. Remove the 90mm Pulleys (24) from the pre-
assembled Double "U"-Bracket (29).
Wrap the Butterfly Cable (32) under a 90mm
Pulley (24). Attach the Pulley to the Double "U"-
Bracket with an M10 x 45mm Bolt (57) and an
M10 Nylon Locknut (49).
16. Wrap the Butterfly Cable (32) around a "V"-Pulley
(25). Attach the Pulley and a Large Cable Trap
(27) to the bracket on the Centre Upright (5) with
an M10 x 60mm Bolt (47) and an M10 Nylon
Locknut (49).
17. Attach the Butterfly Cable (32) to the bracket on
the Right Butterfly Arm (11) with an M8 x 22mm
Shoulder Bolt (60) and an M8 Nylon Locknut (48).
14
Bracket
15
32
16
47
32
49
5
17
48
11
60
10
49
27
25
47
32
5
24
49
57
29
25
27
Bracket
Bracket
32