Refitting The Headlight Mask With The Headlight; Changing The Headlight Bulb - KTM 450 EXC EU Owner's Manual

15 ELECTRICAL SYSTEM
15.7

Refitting the headlight mask with the headlight

15.8

Changing the headlight bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Pull out the electric plug connector
headlight.
B01561-10
Main work
–
Connect the electric plug connector
B01561-11
–
Position the headlight mask and fix it with the rubber band
Info
Ensure that the retaining lugs engage in the fender.
–
Position the brake line and wiring harness. Put the clamp on, mount and tighten
screw .
3
B01560-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Turn protection cap
all the way and remove it.
–
Pull bulb socket
B01562-10
and remove the headlight mask with the
3
.
1
p. 100)
together with the underlying bulb socket counterclockwise
1
of the parking light out of the reflector.
2
.
2
p. 98)
99