15
ELECTRICAL SYSTEM
15.11
Adjusting the headlight range
15.12
Changing the speedometer battery
»
If the light-dark border does not meet specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
Loosen screw
–
Adjust the headlight range of the headlight by moving it up or down.
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver (instructions on how to apply the mark: Checking the
headlight setting).
Info
B01564-10
A change in weight on the vehicle may require a correction of the headlight
range.
–
Tighten screw
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
(EXC EU, EXC AUS, all XC‑W models)
–
Remove screws
–
Pull the speedometer upward out of the holder.
B01565-10
–
Using a coin, turn protection cap
it.
–
Remove speedometer battery
–
Insert the new battery with the label facing upward.
Speedometer battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
101406-10
–
Position protection cap
–
Press any button on the speedometer.
The speedometer is activated.
–
Position the speedometer in the holder.
–
Mount and tighten the screws with washers.
101407-10
p. 101)
p. 100)
.
1
.
1
.
1
all the way counterclockwise and remove
2
.
3
and turn all the way clockwise using a coin.
2
p. 98)
p. 122)
101