Idle Speed Adjusting Screw; Shift Lever; Kick Starter - KTM 450 EXC EU Owner's Manual

6 CONTROLS
6.18

Idle speed adjusting screw

6.19

Shift lever

6.20

Kick starter

The idle speed adjusting screw
The idle speed adjusting screw has two functions.
Turning it controls the idle speed.
Pulling it out all the way raises the idle speed during a cold start.
Possible states
RPM increase activated – Idle speed adjusting screw is pulled out all the way.
•
RPM increase deactivated – Idle speed adjusting screw is pushed in all the way.
•
L00704-10
Shift lever
1
L00705-11
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
L00705-10
The kick starter
The engine can be started with either the kick starter or the electric starter.
The upper part of the kick starter can be swung out.
Info
Before riding, swing the upper part of the kick starter inwards towards the
engine.
L00709-10
is located on the throttle valve body at the top left.
1
is mounted on the left side of the engine.
is fitted on the right of the engine.
1
18