SERVICE WORK ON THE CHASSIS
Installing the lower triple clamp
11.12
3
0 0 3
2
0 0 2
1
0 0 1
x
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether the top steering head seal
–
Slide on protective ring
B00024-10
–
Position the upper triple clamp with the steering.
–
Mount screw
800218-11
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
800219-10
–
Fully tighten screws
Guideline
Screw, bottom triple clamp
B00378-10
–
Tighten screw
Guideline
Screw, top steering head
303508-10
p. 119)
and O-ring
.
but do not tighten yet.
toward the front.
.
.
is correctly positioned.
M8
12 Nm (8.9 lbf ft)
M20x1.5
12 Nm (8.9 lbf ft)
41