Removing The Fork Legs; Installing The Fork Legs - KTM 150 SX Owner's Manual

SERVICE WORK ON THE CHASSIS

Removing the fork legs

x
11.7

Installing the fork legs

x
11.8
–
Remove the front wheel.
–
Remove screws
–
Remove screws
–
Allow the brake caliper and brake line to hang tension-free to the side.
800191-10
–
Unscrew screws
–
Unscrew screws
800217-10
–
Position the fork legs.
Info
The topmost milled groove in the fork leg must be flush to the upper edge of
the upper triple clamp.
Position bleeder screws
101276-10
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
800217-11
–
Position the brake caliper and mount and tighten screws
Guideline
Screw, front brake caliper
–
Position the brake line. Put the clamp on and mount and tighten screws
–
Install the front wheel.
800191-11
( p. 68)
x
and take off the clamp.

and take off the brake caliper.

. Take out the left fork leg.

. Take out the right fork leg.

toward the front.

.

M8
.

M8
M8
( p. 68)
x
17 Nm
(12.5 lbf ft)
12 Nm (8.9 lbf ft)
.

25 Nm Loctite ® 243™
(18.4 lbf ft)
.

39