Service Work On The Chassis; Raising The Motorcycle With The Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - KTM 150 SX Owner's Manual

SERVICE WORK ON THE CHASSIS

Raising the motorcycle with the lift stand

11.1

Removing the motorcycle from the lift stand

11.2
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.

Bleeding the fork legs

11.3
(All 125/150 models)
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels must no longer touch the ground.
800196-10
–
Secure the motorcycle against falling over.
(All 250/300 models)
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels must no longer touch the ground.
800208-10
–
Secure the motorcycle against falling over.
(All SX models)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
spindle.
Info
Remove the plug-in stand before riding.
100950-10
(All XC models)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with
the rubber band.
800211-10
–
Raise the motorcycle with the lift stand. (
into the left side of the wheel

to the ground with your foot and

p. 37)
37