KTM 150 SX Owner's Manual page 69

BRAKES
–
Clean the brake caliper and brake caliper support.
–
Check that leaf spring
caliper support are seated correctly.
Info
The arrow on the leaf spring points in the rotation direction of the brake
disc.
B00358-10
–
Insert the brake linings, insert pin
Info
Make sure that decoupling plate
brake lining.
–
Operate the foot brake lever several times until the brake linings are lying correctly
against the brake disc and there is a pressure point.
B00359-10
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten screw cap
Info
Clean up overflowed or spilt brake fluid immediately with water.
B00360-10
in the brake caliper and sliding plate

, and mount locking split pins

is mounted on the piston side of the

.

p. 117)
with membrane
 
in the brake

.

and the O-ring.
67