Summary of Contents for Healthrider H85t Treadmill
Page 1
Model No. HETL79812.0 Serial No. USER’S MANUAL Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if there are missing parts, please contact us: UNITED KINGDOM Call: 08457 089 009 From Ireland: 053 92 36102 Website: www.iconsupport.eu E-mail: csuk@iconeurope.com...
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4
21. Do not attempt to move the treadmill until DANGER: Always unplug the power it is properly assembled. (See ASSEMBLY cord immediately after use, before clean- on page 7 and HOW TO FOLD AND MOVE ing the treadmill, and before performing the THE TREADMILL on page 21.) You must be maintenance and adjustment procedures able to safely lift 45 lbs.
HEALTHRIDER ® H85T treadmill. The H85T treadmill manual. To help us assist you, note the product model offers an impressive selection of features designed number and serial number before contacting us. The...
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
ASSEMBLY • Assembly requires two persons. • Assembly requires the following tools: the included hex keys • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing one adjustable wrench materials until you nish all assembly steps. one Phillips screwdriver •...
Page 8
3. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (53) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated screws (A) and the shipping bracket (B).
Page 9
5. Identify the Right Upright (79) and the Right Upright Spacer (83). Insert the Wire Harness (86) through the Right Upright Spacer as shown. Set the Right Upright Spacer on the Base (60). Wire Tie With the help of a second person, hold the Right Upright (79) near the Base (60).
Page 10
7. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (53) so the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated screws (A) and the shipping bracket (B).
Page 11
10. Insert the bracket on the Left Handrail (106) into the top of the Left Upright (77). Attach the Left Handrail (106) to the Left Upright (77) with three 5/16" x 3/4" Bolts (4) and three 5/16" Star Washers (9); do not fully tighten the Bolts yet.
Page 12
13. If necessary, press the Left Accessory Tray (94) and the Right Accessory Tray (99) into the con- sole assembly. Console Assembly 14. Raise the Frame (53) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (50) so that the large barrel and the Latch Knob (51) are in the posi- tions shown.
OPERATION AND ADJUSTMENT HOW TO PLUG IN THE POWER CORD Follow the steps below to plug in the power cord. This product must be earthed. If it should malfunc- 1. Plug the indicated end of the power cord into the tion or break down, earthing provides a path of least socket on the treadmill.
Page 14
CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE The console also offers two heart rate workouts that control the speed and incline of the treadmill to help you The treadmill console offers a selection of features keep your heart rate near target heart rate settings. designed to make your workouts more effective and enjoyable.
Page 15
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
Page 16
4. Change the incline of the treadmill as desired. 6. Measure your heart rate if desired. To change the incline of the treadmill, press the Before using the handgrip heart rate monitor, re- Incline increase and decrease buttons or one of move the sheets of plastic from the metal contacts.
Page 17
HOW TO USE A PRESET WORKOUT tones will sound. If a different speed and/or incline setting is programmed for the next segment of the 1. Insert the key into the console. workout, the new speed and/or incline setting will ash in the display to alert you. The treadmill will See HOW TO TURN ON THE POWER on page 15.
Page 18
HOW TO USE A HEART RATE WORKOUT If heart rate workout 18 is selected, the maxi- mum target heart rate setting of the workout will appear in the display after a moment. If desired, press the Intensity increase and decrease buttons CAUTION: If you have heart prob- to change the maximum target heart rate setting...
Page 19
If heart rate workout 18 is selected, At the end of THE OPTIONAL CHEST HEART RATE MONITOR each segment, a series of tones will sound and all target heart rate settings will move one column to Whether your the left. The workout will continue in this way until goal is to the last segment of the workout ends.
Page 20
THE INFORMATION MODE HOW TO USE THE STEREO SOUND SYSTEM The console features an information mode that keeps To play music or audio books through the console’s track of treadmill usage information. The information stereo speakers, you must connect your MP3 player, mode also allows you to select kilometers or miles as CD player, or other personal audio player to the con- the unit of measurement and to turn on and turn off the...
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to the lowest position before you fold the treadmill. left.
TROUBLESHOOTING Most treadmill problems can be solved by follow- c. Remove the key from the console, and then ing the simple steps below. Find the symptom that reinsert it. applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. d.
Page 23
Remove the three #8 x 3/4" Screws (1) and care- begin calibrating, press the Stop button again, and fully pivot the Motor Hood (63) off. then press the Incline increase or decrease button again. When the incline is calibrated, remove the key from the console.
Page 24
SYMPTOM: The walking belt is not centered SYMPTOM: The walking belt slips when walked on between the foot rails. IMPORTANT: If the walking belt rubs against the foot rails, the walking belt a. First, remove the key and UNPLUG THE POWER may be damaged.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
PART LIST Model No. HETL79812.0 R1112A Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Screw Latch Knob #8 x 1" Tek Screw Right Foot Rail 3/8" x 2" Bolt Frame 5/16" x 3/4" Bolt Roller Bracket 3/8" x 4" Screw Idler Roller Ground Wire 1/4"...
Page 27
Key No. Qty. Description Key No. Qty. Description Left Pulse Plate 5/16" x 1 1/2" Bolt Access Door #3 x 1/4" Screw Key/Clip Filter Handrail Cap Motor Isolator Right Handrail Motor Plate Left Handrail Electronics Plate Console Crossbar – User’s Manual Console Clamp Note: Speci...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the H85t Treadmill and is the answer not in the manual?
Questions and answers