Healthrider H85t Treadmill Manual page 12

13. If necessary, press the Left Accessory Tray (94)
and the Right Accessory Tray (99) into the con-
sole assembly.
14. Raise the Frame (53) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (50) so that the large
barrel and the Latch Knob (51) are in the posi-
tions shown.
Attach the lower end of the Storage Latch (50) to
the bracket on the Base (60) with a 3/8" x 1 3/4"
Screw (8).
Attach the upper end of the Storage Latch (50)
to the bracket on the Frame (53) with a 3/8" x 2"
Bolt (3) and a 3/8" Locknut (11).
Lower the Frame (53) (see HOW TO LOWER
THE TREADMILL FOR USE on page 21).
15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear
plastic on the treadmill decals, remove the plastic. To protect the  oor or carpet, place a mat under the tread-
mill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 23 and 24).
13
Console
Assembly
14
11
50
Large
Barrel
60
12
94
99
53
3
51
8