Healthrider H85t Treadmill Manual page 20

THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information. The information
mode also allows you to select kilometers or miles as
the unit of measurement and to turn on and turn off the
display demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, and then
release the Stop button. When the information mode
is selected, the following information will appear in the
display:
The upper left
corner of the
lower display will
show the number
of hours that the
treadmill has
been operated. The lower right corner of the display
will show the total number of miles or kilometers that
the walking belt has moved. In addition, an “"M”" for
metric kilometers or an “"E”" for English miles will appear
in the upper right corner of the display. To change the
unit of measurement, press the Speed increase but-
ton. The lower left corner of the display will show the
volume level. To change the volume level, press the
Incline increase button.
The console fea-
tures a display
demo mode,
designed to be
used if the tread-
mill is displayed
in a store. While the demo mode is turned on, the con-
sole will function normally when you plug in the power
cord, press the power switch to the reset position, and
insert the key into the console. However, when you
remove the key, the displays will remain lit, although
the buttons will not function. If the demo mode is
turned on, a “"d”" will appear in the upper display while
the information mode is selected. To turn on or turn off
the demo mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’'s
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
sole through the MP3 jack.
To use the MP3 jack, plug your audio wire into the MP3
jack. Then, plug your audio wire into a jack on your
MP3 player, CD player, or other personal audio player.
Make sure that your audio wire is fully inserted.
Next, press the play button on your MP3 player, CD
player, or other personal audio player. Adjust the vol-
ume on your personal audio player.
If you are using a personal CD player and the CD
skips, set the CD player on the  oor or another  at sur-
face instead of on the console.
20