Healthrider H85t Treadmill Manual page 8

3. With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (53) so that the treadmill is more stable;
do not fully fold the Frame yet.
Remove and discard the two indicated screws
(A) and the shipping bracket (B).
Cut the shipping tie securing the Wire Harness
(86) to the Base (60). Locate a tie in the indi-
cated hole in the Base, and use the tie to pull the
Wire Harness out of the hole.
Attach two Base Feet (88) to the Base (60) in the
locations shown with two #8 x 1" Tek Screws (2)
and two Base Foot Spacers (89). Then, attach
two Base Feet (88) with only two #8 x 1" Tek
Screws (2).
4. Attach a Wheel (90) with the 3/8" x 2" Bolt (3)
and the 3/8" Locknut (11) that you removed in
step 1. Do not overtighten the Locknut; the
Wheel must turn freely.
Press a Base Cap (85) into the Base (60).
3
86
89
88 2
53
4
3
90
11
8
A
B
60
88
2
Hole
88
2
89
88
2
60
85