Inspect/Adjust Monthly; Inspect/Adjust Periodically - Invacare ProSPIN X4 Owner's Manual

Inspect/Adjust Monthly

❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Ensure wheel locks DO NOT interfere with tires when rolling.
❑ Ensure wheel lock pivot point are free of wear and looseness.
❑ Ensure all caster/wheel/fork/fork stem fasteners are secure.
❑ Ensure all hardware is tight.
❑ Ensure hand grips are not loose.

Inspect/Adjust Periodically

❑ Ensure Wheelchair rolls straight (no excessive drag or pull to one side).
❑ Ensure arms are secure but easy to release and adjustment levers engage properly.
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure armrest pad sits flush against arm tube.
❑ Inspect for bent or protruding metal on clothing guards.
❑ inspect all fasteners on clothing guards are secure.
❑ Ensure seat and/or back upholstery have no rips.
❑ Inspect modular seat rail attaching hardware is securely tightened.
❑ Inspect back mounting plate attaching hardware is securely tightened.
❑ Inspect for excessive side movement or binding when rear wheels are lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling finish.
❑ Inspect tires/casters for flat spots and wear.
❑ Check pneumatic tires for proper inflation (recommended tire pressure is listed on the
side wall of the tire).
❑ Ensure wheel lock pivot point are free of wear and looseness.
❑ Clean upholstery and armrests.
❑ Ensure sealed bearings and axle nut tension are correct.
❑ Ensure wheel/fork assembly has proper tension when caster is spun. Caster should
come to a gradual stop.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Ensure wheel locks are easy to engage.
Part No 1125104
SECTION 5—MAINTENANCE INSPECTION/TROUBLESHOOTING
35
ProSPIN™ X4™