Section 10-Seat; Replacing Seat Upholstery - Invacare ProSPIN X4 Owner's Manual

SECTION 10—SEAT
SECTION 10—SEAT
WARNING
After ANY adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.

Replacing Seat Upholstery

NOTE: For this procedure, refer to FIGURE 10.1.
1. Remove the seat cushion, if necessary, from the wheelchair.
NOTE: Number of mounting screws will vary depending on seat depth.
2. Remove the mounting screws that secure the existing seat upholstery to the seat
frame.
3. Remove the existing seat upholstery.
4. Install the new seat upholstery by reversing STEPS 1‐3.
5. If necessary, reinstall the seat cushion onto the wheelchair.
Mounting Screws
Seat Upholstery
Seat Frame
FIGURE 10.1 Replacing Seat Upholstery
63
Part No 1125104 ProSPIN™ X4™