Invacare Pro Spin X4 Specification

Invacare ® ProSPIN ™ X4 ™ Ultralightweight Custom Manual Wheelchair
ProSPIN ™ Specifications Knee-to-heel (Fixed frame)*
Frame style Folding frame with swingaway front Front rigging type min
Seat width 14" - 20", 22" Adjustable angle flip-up 14.00 "
Seat depth 14" - 22" 1 pc. tubular flip-up 14.00"
Back height 10" - 20" * Range adjusts in 1/4" increments. Measurement taken from top of seat rail to back
of footrest.
Adjustable-angle back 75˚-105˚ (in 5˚ increments)
Camber angles 0˚, 3˚, 6˚
Arm heights*
Tubing outside diameter 1"
AT99* 8" - 10"
Weight of chair 15 lb.**, 30 lb.***
CAD* 10" - 14"
Weight capacity 250 lb., 350 lb. (Heavy-Duty option)
CAF* 10" - 14"
Limited warranty Limited lifetime on frame and crossbraces
TAD** 6" - 10"
** Base chair weight without accessories.
TAF** 8" - 14"
***
16" x 16", AT99, BH20, BRG2, BLUM2, SPCR1, WLPLL, SPIN24, PRIMO, 70STAPER, 1651, HLOOP,
IMPACTG, BACK1216, SLIPBACK, 1671LG, ALUMPC, A1577.
* Range adjusts in 1" increments. ** Range adjusts in 0.5" increments.
All measurements from top of seat rail to top of armrest. On AT99, add 1" for upholstered arm
Knee-to-heel*
pads. For less-seat-rail chairs, add 1.5" to above measurements (top of upper frame rail to top of
armrest.)
Folding frames w/ seat rails
Rear seat-to-floor heights
Front rigging type min max
60˚ 14.00 " 19.00"
13.5" - 18" 20 Com, 20SP
70˚ 14.00" 19.00"
14.5" - 19" 22 Com, 22SP
70˚ Tapered 14.50" 19.50"
15.5" - 20" 24 Com7, 24SP, 24HSP, 24SPIN
* Range adjusts in 1" increments. Measurement taken from top of seat rail to back of footrest.
16.5" - 20.5" 25SPIN, 559TS, 26SP, 26HSP, 26SPIN
Front Seat-to-floor heights
* * ANSI/RESNA W/C 19 sec 6.2 Presale Literature Notification
Spacer 3" 4" 5" 6"
ProSPIN X4 Swing-away
Fork 5SOFT
Minimum turning radius 19.5" Minimum turn-around width 36" (16W x 17D without
AT901 AT902 AT902
footrests) ProSPIN X4 20" or deeper may be longer than 1220 mm, exceeding the ADA
AT900 4ALUM2 5ALUM2 6ALUM2
definition of common wheelchair and the maximum length requirements of lifts on
SPCR0 15.50"
public vehicles, and may therefore present particular difficulties accessing some
BRG1 15.50" 16.00" 16.50"
vehicles. Total wheelchair mass = 45 lb. (20.5kg) – including front riggings, 24COM7
16.00" 16.50" 17.00" 17.50"
with PNEUFF, Tie-down brackets, T-arms, 6" Casters, Wheellocks, Seat cushion, and
SPCR1 16.50"
wheelchair-anchored pelvic belt. Average lateral dummy displacement = approximately
16.50" 17.00" 17.50"
0.77" (19.6mm).
17.00" 17.50" 18.00" 18.50" Overall Score = 13 Overall Rating = B
The ProSPIN X4 tested was sized to accommodate a 170 lb. test dummy (16W x 17D,
SPCR2 17.50"
17.50" 18.00" 18.50" 60 degree front rigging, 24" composite wheels, 24" Flat free pneumatic tires, seat
cushion, sling back, 6" urethane casters). The ProSPIN X4 tested was tied-down using
18.00" 18.50" 19.00" 19.50"
four tie-down brackets – 2 brackets located near the front of the frame and 2 brackets
SPCR0 17.50" 18.00" 18.50"
located on the rear of base frame. The ProSPIN X4 was tested with a 170 lb. test
BRG2 17.50" 18.00" 18.50" 19.00"
dummy.
18.00" 18.50" 19.00" 19.50"
The ProSPIN X4 tested used a wheelchair-anchored pelvic belt and vehicle-anchored
SPCR1 18.50" 19.00" 19.50"
shoulder belt. The ProSPIN X4 tested complies with the performance requirements of
18.50" 19.00" 19.50" 20.00"
ANSI/RESNA W/C 19 sec 5.3. for all types of vehicles, the ProSPIN X4 requires four
19.00" 19.50" 20.00" 20.50"
SAE J2249 - compliant tie-down strap assemblies for effective securement.
SPCR2 19.50" 20.00" 20.50" When the TRRO option is selected, the ProSPIN X4 provides a location for anchoring of
19.50" 20.00" 20.50" 21.00" an Invacare-provided pelvic belt. This belt has been tested in accordance with
ANSI/RESNA W/C 19.The wheelchair-anchored pelvic belt is supplied by Invacare.
20.00" 20.50" 21.00" 21.50"
SPCR0 16.50"
SOFR-F 16.50" 17.00" 17.50"
17.00" 17.50" 18.00" 18.50"
SPCR1 17.50"
17.50" 18.00" 18.50"
18.00" 18.50" 19.00" 19.50"
SPCR2 n/a n/a n/a n/a
Invacare
max
18.00"
18.00"
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324
© 2008
Invacare Corporation.
All rights reserved.
All trademarks are identified by
the symbols ™ and ®. All
trademarks are owned by or
licensed to Invacare Corporation
unless otherwise noted.
Spinergy is a registered
trademark of Spinergy, Inc.
Schwalbe is a registered
trademark of
RALF BOHL GmbH in
Reichshof Germany
.
Specifications are
subject to change
without notification.
Form No. 05-005
Rev. 03/08
® ProSPIN ™ X4 ™ Ultralightweight Custom Manual Wheelchair