Setting Configuration Options - HP Surestore Tape Library Model 2/15 User Manual

Library Operation

Setting Configuration Options

Setting Configuration Options
1 2 ADMIN* PSWD 000 000 000
Set certain options, called configurations, to customize the way the library
operates.
To change a configuration:
1. Verify that the drive status displays (if not, press
2. Press until ADMIN* displays, then press
NEXT
3. Enter the three-part numerical password (see "Entering the
Administration Menu Password" on page 4-7).
4. INFO* displays. Press
5. Press or
NEXT PREV
then press . If the configuration has multiple settings, the current
ENTER
setting flashes. Otherwise, the configuration option is set and a
confirmation message displays. (Configuration options are described on
the following pages.)
If the current configuration setting is flashing, press
the desired setting displays, then press
6. Press to return to the drive status ("ready" state).
CANCEL
4-24
until CONFIG* displays, then press
NEXT
until the name of the configuration to set displays,
ENTER
CONFIG*
until it does).
CANCEL
.
ENTER
ENTER
or until
NEXT PREV
. OPTION SAVED displays.
.