Library Installation
Step 5: Set the SCSI Interface Mode Switch
Table 2-4
Library Connection Options
Configuration
One-Drive Library
Two-Drive Library
Daisy chained
(DLT4000 drives only)
Minimum host
I/O slots used
Two-Drive Library
Bus 1 and bus 2
connect to separate
SCSI cards
Maximum performance
Additional card and
cable required
2-8
Table 2-4 shows three ways to connect the library and the corresponding
SCSI interface mode switch settings.
Cabling
SCSI Interface Mode Switch
Settings
•bus 2 not
used