Retrieving Performance Information; Table 4-6 Information Logs - HP Surestore Tape Library Model 2/15 User Manual

Retrieving Performance Information

1 2
Use the INFO* option to dDisplay information about the operations of the
library. This information is called a log.
To access an information log:
1. Verify that the drive status displays (if not, press
2. Press
3. Enter the three-part numerical password (see "Entering the
4. INFO* displays. Press
5. Press
6. Press
Table 4-6 Information Logs
REVISION
LIB ODOMETERS *
Press to select
ENTER
the odometer logs.
DRIVE LOADS *
ADMIN* PSWD 000 000 000
until ADMIN* displays, then press
NEXT
Administration Menu Password" on page 4-7).
ENTER
until the name of the log to access displays, then press
NEXT
An asterisk (*) indicates that there are more choices beneath the
displayed choice.
to return to the drive status ("ready" state).
CANCEL
Problem
HOURS #
MOVES #
XLATES #
DRIVE 1
DRIVE 2
Retrieving Performance Information
INFO*
CANCEL
ENTER
.
Solution
Library firmware revision number.
Number of operation hours (time during
which power was on). Some time may have
been spent in power reduction mode.
Total number of moves and move attempts by
the cartridge transport mechanism.
Total number of cartridge transport
mechanism horizontal moves.
Number of tape cartridge loads for drive 1.
Number of tape cartridge loads for drive 2
(two drive library only).
Library Operation
until it does).
.
.
ENTER
4-27