HP Surestore Tape Library Model 2/15 User Manual page 78

Library Operation
Retrieving Performance Information
Table 4-6 Information Logs (Continued)
DRIVE FW*
INTERFACE FW*
HARD ERROR *
Log entries are described after "RECOVERY
ERROR" in this table.
SOFT ERROR *
Log entries are described after "RECOVERY
ERROR" in this table.
RECOVERY ERROR *
Log entries are described in the following rows.
4-28
Problem
D1 REVISION#
D2 REVISION#
BUS NUM =
Solution
Firmware revision of drive 1.
Firmware revision of drive 2 (two drive
library only).
Press or to display the interface
NEXT PREV
bus number to select, then view:
FAST WIDE SCSI Fast wide interface
bus type.
8052 REV # Displays the SCSI
interface processor 8052
firmware revision.
8052 CKSUM # Checksum of the
8052 code.
COBRA REV # Revision of the cobra
chip on the interface.
Log of unrecoverable errors and commands
that did not successfully complete. Returns
either "NO HARD ENTRIES" or "ENTRY #".
(There may be multiple hard error numbers.)
Press to view the log for the currently
ENTER
displayed error, or press
next error.
Log of recovered errors and commands
successfully completed. Returns either "NO
SOFT ENTRIES" or "ENTRY #". (There may
be multiple soft error numbers.) Press
to view the log for the currently displayed
error, or press to select the next error.
NEXT
Log of errors during most recent move.
Returns either "NO ENTRIES" or the number
of recovery errors. Press
log for the currently displayed error, or press
to select the next error.
NEXT
to select the
NEXT
ENTER
to view the
ENTER