HP Surestore Tape Library Model 2/15 User Manual page 75

The following table describes the available configurations.
Table 4-5 Configuration Options
Config Name
RECOVERY ON
ON/OFF
OFF
Default is RECOVERY ON, and recovery should remain ON
under normal conditions.
RESTORE Sets all library configurations back to their default settings.
DEFAULTS
CLEAR Used by service personnel only.
ODOMETERS
Sets all library odometers back to zero.
STARWARS Used by service personnel only. Set to ON during normal
ON/OFF
operation.
ON
OFF
NEW PASSWORD Changes the numerical password required to access ADMIN*
options (configurations, tests, and information logs). To
change the password, see "Setting a New Administration Menu
Password" on page 4-8.
SECURE ON/OFF Toggles between ON and OFF. If the configuration is set to ON,
tape magazines cannot be loaded or removed. If the
configuration is set to OFF, the library operates in its default
state, which allows cartridges to be loaded and removed.
POWER SECURE ON
ON/OFF
OFF
Description
Library attempts to recover from errors.
Library immediately stops moving if an error
condition occurs.
Library runs with the vertical sensors enabled.
Library runs with the vertical sensors disabled.
SECURE ON/OFF configuration setting is retained
after a power outage.
Library returns to its default setting of POWER
SECURE OFF when power is returned after being shut
off.
Library Operation
Setting Configuration Options
Default
ON
—
—
ON
—
OFF
OFF
4-25