Step 7: Connect Power - HP Surestore Tape Library Model 2/15 User Manual

Hp dlt tape library 15-slot - (english) user's guide

Hide thumbs Also See for Surestore Tape Library Model 2/15:

Table of Contents

Step 7: Connect Power

1. Plug the power cord into a proper outlet.

2. Turn on the power switch.

NOTE

If the drive status information does not display, the power-on test was not

successful and DEVICE FAILED displays. See "resolving Other Problems"

on page 4-43.

3. Turn on the host system.

SELF TEST and NOT READY, and then NOT READY and INVENTORY

CHECK display alternately. After the power-on test completes (in about 3

minutes), the drive status information displays. (See "Understanding the

Display Window" on page 4-4.)

Library Installation

Step 7: Connect Power

2-13

Table of Contents

Do you have a question about the Surestore Tape Library Model 2/15 and is the answer not in the manual?

A4851a