Performing Operations21; Using The Stm Tools21 - HP Surestore Tape Library Model 10/180 Configuration Manual

Performing
Operations
Using the STM
Tools
There are three basic operations in STM:
1. To select a device or devices:
In xstm, click on the device icon.
•
In mstm, move the cursor over the device, and press <SPACE>.
•
2. To run a tool:
Tools -> <tool> -> Run
3. To view logs after the tool completes:
Tools -> <tool> -> <log>
The Information tool creates an information log that contains
•
firmware revisions and other useful device data. After the tool has
created the log, you must then display it.
Tools -> Information -> Run
The Verifier tool ensures the device is accessible by the operating
•
system.
Tools -> Verify -> Run
The Exerciser tool stresses the device.
•
Tools -> Exercise -> Run
The Diagnostic tool attempts to isolate a hardware problem to a
•
Field Replaceable Unit (FRU).
Tools -> Diagnose -> Run
The Expert tool allows the user to interactively perform operations
•
on the device.
Tools -> Expert Tool -> Run
Diagnostic support tools 21