HP Surestore Tape Library Model 10/180 Configuration Manual page 31

Table 6
Category Command
Utility
Rezero
Position to
Element
Move Medium
Exchange
Medium
Init Element
Status
Set Drive
Status
Recalibrate
Data Capture
Set Serial
Number
Options
Display Format
Help
General Help
Version
Robotic Controller Expert Tool Command
Effect
Performs "rezero" command on robotics.
Performs "position to element" command on
robotics.
Moves 1 tape cartridge in library.
Moves 2 tape cartridges in library.
Performs "initialize element status" command on
robotics.
Changes on-line drive repair status of tape drives in
library.
(May not be supported, depending on library
model.
reports results.
Runs the "tape_capture -D -m" command and
displays the results.
Changes the electronic serial number of robotics.
Displays data as either raw hex, decoded format
text, or both.
Brings up a dialog box with various help topics
about expert tool.
Displays the version number of expert tool.
) Performs a "recalibrate" diagnostic test and
Diagnostic support tools 29