Verifying The Installation10 - HP Surestore Tape Library Model 10/180 Configuration Manual

Hp tape library configuration guide

Hide thumbs Also See for Surestore Tape Library Model 10/180:

Table of Contents

Verifying the

Installation

Configuring the Host System

Confirm that the communications path to the robotics controller is

functional:

1. Compile the SCSI I/O test program:

cc /usr/contrib/src/scsi_io.c. -o/usr/contrib/

bin/scsi_io

2. Run the SCSI I/O test program, using the device file created

during installation. For example, if the device file name is /dev/

rmt/HPA1234, the command would be:

/usr/contrib/bin/scsi_io /dev/scsi/HPA1234

If the robotics is correctly configured, the following appears:

the thing claims to be: HP C7200-8000

NOTE

HP C7200-8000 is used only as an example. The actual

ioscan output will reflect the product number and firmware

revision of the library you are configuring.

Table of Contents

Need help?

Do you have a question about the Surestore Tape Library Model 10/180 and is the answer not in the manual?