Topspin/Mellanox Pci-X Hca Specifications - HP Cluster Platform Interconnects v2010 User Manual

Feature
Physical Characteristics
Environmental, Operating
Environmental, Storage
F.2 Topspin/Mellanox PCI-X HCA Specifications
This section includes the specifications for the Topspin/Mellanox PCI-X HCA. The HCA offers
two 4x InfiniBand 10 Gb/s ports providing an aggregate 40 Gb/s InfiniBand bandwidth full duplex
(2 ports x 10 Gb/s/port x 2 for full duplex).
General Specifications
Power and Environmental
Operating System Support
126 HCA PCI Card Specifications
Specification
Low-profile MD2.
Dimensions(H x D) 2.5 in. (64 mm) x 6.7 in. ( 170 mm).
Temperature: 32 Deg to 122 Deg F (0 Deg to 50Deg C)
Humidity: 15 to 80%, non-condensing.
Altitude: 0 to 9843 ft (3000m).
Temperature: -13 Deg to 158 Deg F (-25 Deg to 70 Deg C).
Humidity: 5 to 90% non-condensing.
Altitude: 0 to 15,000 ft (4570m).
Processor
Line rate bandwidth
Observed bandwitdh (configuration
dependant)
Latency (configuration dependant)
On-board memory
Bus
Ports
Connectors
Cabling
Dimensions (LxW)
Operating Temperature
Operating Humidity
Non-operating Temperature
Non-operating Humidity
Power requirement
Emissions standards
Safety compliance
32–Bit Linux:
Mellanox MT23108 InfiniHost™
4x(10 Gb/s) per port (40 Gb/s aggregate
full duplex
half-duplex and full-duplex: 7 Gb/s
< 6 μs
128 MB
64–bit 133Mhz PCI-X
Dual InfiniBand 4x copper
Two InfiniBand 4x copper
Up to 15 m (50 ft) with 4x InfiniBand
copper cabling
6.6 x 2.5 in (16.77 cm x 6.40 cm)
32° to 131° F (0° to 55° C)
5% to 85% non-condensing
-40° to 149° F
5% to 95%
3640 mA @ 3.3 V maximum
FCC Class B
CISPR 22 Class B
UL 60950
CSA 60950
IEC/EN 60950
Red Hat Enterprise Linux AS 2.1, 3, 4
SuSE LINUX Enterprise Server 8, 9