B Isr 9024 S/D Interconnect Specifications (Rohs Compliant) - HP Cluster Platform Interconnects v2010 User Manual

B ISR 9024 S/D Interconnect Specifications (RoHS
Compliant)
The technical specifications of the ISR 9024 S/D interconnect (RoHS Compliant) are as follows:
Feature
InfiniBand Ports
Management
Switch Specifications
Cooling
Power
Electrical ratings [V, A,
hz]
Power Inlet Type
Technical Specification
24 4X Single Data Rate (SDR – 10 Gb/s) ports, or
24 4X Dual Data Rate (DDR – 20 or 10 Gb/s auto-negotiate)
Interconnect options: copper, with optional support for optical adaptors on top row 12
ports
Indicators: physical and logical status
All ports are located on the rear panel
Remote InfiniBand (in-band) management, both for externally or internally managed
devices
On-board processor running GridVision fabric and device management software with
GUI, CLI, and SNMP (on ISR 9024S/D-M only)
Connectors: EIA/TIA-232 console and RJ-45 Ethernet (on ISR 9024S-M and ISR 9024D-M
only)
Aggregate Data Throughput: 960 Gb/s (DDR) or 480 Gb/s (SDR)
Port-to-port Latency: 140 nanoseconds (max.)
Linear Forwarding Table: 48K entries
Multicast table size: 1K entries
Data Virtual Lanes: 8
Management Virtual Lanes: 1
MTU: 4096 bytes maximum
Hot swappable fan unit (FN-24) containing two fans for high availability
Auto-heat sensing to allow for silent fan operation
Front-to-rear cooling
18 CFM
100–240VAC, 2.0A, 50/60 Hz
1.8A@120V 0.8A@230V
47–63Hz, auto-sensing
C14
113