Setting The Customer Ip Address - HP 9000 Superdome SX2000 Installation Manual

1. Connect one end of the RJ-45 LAN cable to the LAN port on the MP
Figure 39 MP LAN Connection Location
2. Connect the other end of the LAN cable to the customer-designated LAN port. Obtain the IP
address for the MP from the customer.
Connect the dial-up modem cable between the MP modem and the customers phone line
connection.

Setting the Customer IP Address

NOTE: The default IP address for the customer LAN port on the MP is 192.168.1.1.
To set the customer LAN IP address, follow these steps:
(Figure 39).
Connecting the MP to the Customer LAN 47