Adding an IOX Cabinet
There are two (2) IOX cabinet designs available: AF034A and AF092A. Each are different in
design. They support the IOX mounted inside to connect the e-link cables to the Superdome server.
Ensure your customer's cabinet is identified correctly.
In
Figure 36 (page
added to the rear with custom vertical side access panels. These vertical openings are located
slightly above center height on either side to aid in e-link cable management routing.
On the right, the recently released AF092A rack is designed 200mm longer and requires that the
middle and top side panels adjacent to the host Superdome cabinet are removed for e-link cable
routing.
These views are from the front. Either IOX cabinet can be placed next to either side of the Superdome
cabinet(s).
Figure 36 3/4 Front View of IOX Cabinets AF034A (left) and AF092A (right)
Installing the Support Management Station
The Support Management Station (SMS) ships separately in boxes. The SMS software and 3
Revisions of Superdome Firmware history are preloaded at the factory.
NOTE:
The SMS Shelf may or may not be installed in the factory prior to shipping.
Installing the SMS Support Shelf
1.
Unpack the HP Compaq 6200 Pro Series SMS and Support Shelf from their respective shipping
containers.
40
Installing the System
40), note that the AF034A cabinet on the left has 200mm length extension