Unpacking The Pdca; Returning Equipment - HP 9000 Superdome SX2000 Installation Manual

Unpacking the PDCA

At least one PDCA ships with the system. In some cases, the customer might order two PDCAs, the
second to be used as a backup power source. Unpack the PDCA and ensure it has the power cord
option for installation.
Several power cord options are available for the PDCAs. Only options 6 and 7 are currently
available in new system configurations
and 7.
Table 1 Available Power Options
Option Source
Type
6 3-phase
7 3-phase
1 A dedicated branch circuit is required for each PDCA installed.
Table 2 Power Cord Option 6 and 7 Details
PDCA Part Number
A5201-69023
(Option 6)
A5201-69024
(Option 7)

Returning Equipment

If the equipment is damaged, use the original packing material to repackage the cabinet for
shipment. If the packing material is not available, contact the local HP Sales and Support Office
regarding shipment.
Before shipping, place a tag on the container or equipment to identify the owner and the service
to be performed. Include the equipment model number and the full serial number, if applicable.
The model number and the full serial number are printed on the system information labels located
at the bottom front of the cabinet.
WARNING!
are required to push the cabinet up the ramp and position it on the pallet. Inspect the condition of
the loading and unloading ramp before use.
Repackaging
To repackage the cabinet, follow these steps:
1. Assemble the HP packing materials that came with the cabinet.
2. Carefully roll the cabinet up the ramp.
3. Attach the pallet mounting brackets to the pallet and the cabinet.
18 Installing the System
Source Voltage
(Nominal)
Voltage range 200 to
240 V ac,
phase-to-phase, 50 Hz
/ 60 Hz
Voltage range 200 to
240 V ac,
phase-to-neutral, 50 Hz
/ 60 Hz
Attached Power Cord
OLFLEX 190 (PN 600804) is a 2.5 meter
multiconductor, 600 V, 90˚C, UL and CSA
approved, oil resistant flexible cable. (8
AWG 60 A capacity)
H07RN-F (OLFLEX PN 1600130) is a 2.5
meter heavy-duty neoprene jacketed
harmonized European flexible cable. (4
2
mm 32 A capacity)
Do not attempt to push the loaded cabinet up the ramp onto the pallet. Three people
(Table 1 (page 18)). Table 2 (page 18)
PDCA Input Current Per
Required Phase 200 to 240 V
1
ac
4-wire 44 A maximum per
phase
5-wire 24 A maximum per
phase
Attached Plug
Mennekes ME 460P9
(60 A capacity)
Mennekes ME
532P6- 1 4 (32 A
capacity)
details options 6
Power Receptacle Required
Connector and plug provided
with a 2.5 m (8.2 feet) power
cable. An electrician must
hardwire receptacle to 60 A site
power.
Connector and plug provided
with a 2.5 m (8.2 feet) power
cable. An electrician must
hardwire receptacle to 32 A site
power.
Receptacle Required
Mennekes ME 460R9
(60 A capacity)
Mennekes ME
532R6- 1 500 (32 A
capacity)