Figure 48 HP Integrity Superdome/sx2000 EFI Boot Manager
Use the up and down arrow keys on the keyboard to highlight EFI Shell (Built-in) and
press Enter. Do this for all partitions.
After you start the EFI Shell, the console window displays the EFI shell prompt
(Figure
49).
Figure 49 EFI Shell Prompt
NOTE:
If autoboot is enabled for an nPartition, you must interrupt it to stop the boot process at
the EFI firmware console.
The VFP indicates that each partition is at system firmware console
(Figure
50).
Booting and Verifying the System
53