HP 9000 Superdome SX2000 Installation Manual page 16

Hp installation guide, hp integrity superdome/sx2000 and hp 9000 superdome/sx2000 servers
Hide thumbs Also See for 9000 Superdome SX2000:
Table of Contents

Advertisement

Figure 9 Removing the Mounting Brackets
WARNING!
bolts prevent the cabinet from rolling off the back of the pallet.
3.
On the other side of the pallet, remove only the bolt on each mounting bracket that is attached
to the cabinet.
4.
Insert the ramps into the slots on the pallet.
CAUTION:
The casters on the cabinet must roll unobstructed onto the ramp.
16
Installing the System
Do not remove the bolts on the mounting brackets that attach to the pallet. These
Make sure the ramps are parallel and aligned
(Figure
10).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Integrity superdome9000 superdome9000 sx2000

Table of Contents