Selecting The Optimum Environment; Installing Options; Unpacking The Shipping Boxes - HP StorageWorks NAS 9000s Quick Reference And Rack Installation Instructions

1. Selecting the Optimum Environment

Select an installation site that meets the following requirements:
Space and airflow
Temperature
Power
Grounding
Detailed installation site requirements for this server are listed in
the setup and installation guide. For guidance in placing servers
and components into a rack, refer to the rack template or the
setup and installation guide.

2. Unpacking the Shipping Boxes

Unpack the server by following the instructions and illustrations
printed on the outside of the boxes. Also unpack the power cords,
rack mounting hardware, and the hardware documentation,
reference information, and software packs that are located in the
country kit box.
In addition to these items, you may need:
Torx T-15 tool, which is located on the rear of the server
Phillips screwdriver
Options to be installed, such as expansion boards, monitors,
power supplies, processors, processor power modules
(PPMs), and memory modules
Application software
Flat-blade screwdriver
Felt-tip marker or pencil
Note: Save the packing material for reuse if you need to ship the
server in the future.
Note: Protect the server from power fluctuations and temporary
interruptions with a regulating uninterruptible power supply (UPS).
This device protects the hardware from damage caused by power
surges and voltage spikes, and keeps the system in operation during a
power failure. For more information on UPS and other options, refer to
the HP website:
www.hp.com

3. Installing Options

If you are installing additional options, such as expansion boards,
processors, PPMs, hard drives, or memory, you can refer to the
instructions included with the option purchase, the back of this
poster, or the setup and installation guide.
Note: For quick start memory guidelines, refer to the flowchart and
other information located on the back of this poster.