Configuration Procedure - HP 6125XLG Configuration Manual

A multi-line banner can be up to 2000 characters. To input a multi-line banner, use one of the
following methods:
Method 1—Press Enter after the last command keyword. At the system prompt, enter the banner
and end the last line with the delimiter character %. For example, you can configure the banner
"Have a nice day. Please input the password." as follows:
<System> system-view
[System] header shell
Please input banner content, and quit with the character '%'.
Have a nice day.
Please input the password.%
Method 2—After you type the last command keyword, type any single printable character as
the start delimiter for the banner and press Enter. At the system prompt, type the banner and
end the last line with the same delimiter. For example, you can configure the banner "Have a
nice day. Please input the password." as follows:
<System> system-view
[System] header shell A
Please input banner content, and quit with the character 'A'.
Have a nice day.
Please input the password.A
Method 3—After you type the last command keyword, type the start delimiter and part of the
banner and press Enter. At the system prompt, enter the rest of the banner and end the last line
with the same delimiter. For example, you can configure the banner "Have a nice day. Please
input the password." as follows:
<System> system-view
[System] header shell AHave a nice day.
Please input banner content, and quit with the character 'A'.
Please input the password.
A

Configuration procedure

To configure banners:
Step
1. Enter system view.
2. Configure the legal banner.
3. Configure the MOTD banner.
4. Configure the login banner.
5. Configure the shell banner.
Command
system-view
header legal text
header motd text
header login text
header shell text
100
Remarks
N/A
By default, the legal banner is not
configured.
By default, the MOTD banner is not
configured.
By default, the login banner is not
configured.
By default, the shell banner is not
configured.