Emergency Shell Usage Example; Network Requirements; Usage Procedure - HP 6125XLG Configuration Manual

Task
Display copyright information.
Display software package information.
Display management Ethernet interface information.
Display IPv4 routing information.
Display IPv6 routing information.
Display boot image version information.

Emergency shell usage example

Network requirements

The device has only the boot image (boot.bin) and enters emergency shell after startup. The device and
PC can reach each other.
Use the TFTP client service on the device to download system image system.bin from the PC and start the
Comware system on the device.
Figure 30 Network diagram

Usage procedure

# Check which files are stored and how much space is available on the storage medium of the device.
<boot> dir
Directory of flash:/
0 drw-
1 -rw-
2 -rw-
3 -rw-
524288 KB total (513248 KB free)
The output shows that the boot image boot.bin is present but the matching system image system.bin is not,
and the available space is 513248 KB, enough for saving the system image system.bin.
# Check the version information of the boot image.
<boot> display version
HP Comware Software
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. All rights reserved.
HP 6125XLG Blade Switch Software Version V200R001B02D024
HP 6125XLG Blade Switch uptime is 0 weeks, 0 days, 0 hours, 10 minutes
5954 Apr 26 2012 21:06:29
1842 Apr 27 2012 04:37:17
1518 Apr 26 2012 12:05:38
2045 May 04 2012 15:50:01
Command
display copyright
display install package package
display interface m-eth0
display ip routing-table
display ipv6 routing-table
display version
logfile
boot.bin
startup.cfg
backcfg.cfg
117