HP 6125XLG Configuration Manual page 128

3. After getting automatic configuration parameters, the device tries to download a configuration file
from a TFTP server. For more information, see
4. If the device gets a configuration file, it deletes its temporary settings to restore the factory defaults
and then executes the configuration file. Otherwise, the device deletes its temporary settings,
select another interface for automatic configuration, and repeats Step 2 to Step 4.
IMPORTANT:
To ensure quick and successful automatic configuration of a device, connect only the interface used for
•
automatic configuration to the network.
• The configuration file is deleted after being executed. After the device completes the automatic
configuration process, save the configuration by using the save command. Otherwise, the device has to
perform automatic configuration again after reboot. For more information about the save command,
Fundamentals Command Reference
see
Figure 32 shows the automatic configuration workflow.
"Configuration file acquisition
.
121
process."