Loading The System Image; Rebooting The Device; Displaying Device Information In Emergency Shell Mode - HP 6125XLG Configuration Manual

Task
Use SSH to connect to an IPv4 server.
To access a remote IPv6 server, execute one of the following commands to obtain a system image in user
view:
Task
Use FTP to download a file from or upload a file to
an IPv6 server.
Use TFTP to download a file from or upload a file to
an IPv6 server.
Telnet to an IPv6 server.
Use SSH to connect to an IPv6 server.

Loading the system image

IMPORTANT:
The version of the system image must match that of the boot image. Before loading a system image, use the
display version and display install package commands to check the version information of the boot
image and system image.
When you load the system image, the system modifies the main startup software image set to include
only the boot image and system image so the device can reboot correctly.
To load the system image, execute the following command in user view:
Task
Load a system image.

Rebooting the device

To reboot the device, execute one of the following commands as appropriate in user view:
Task
Reboot the current member device.
Displaying device information in emergency shell
mode
Execute display commands in any view.
Command
ssh2 server-ipv4-address
Command
ftp ipv6 server-ipv6-address user username password
password { get remote-file local-file | put local-file
remote-file }
tftp ipv6 server-ipv6-address { get remote-file local-file |
put local-file remote-file }
telnet ipv6 server-ipv6-address
ssh2 ipv6 server-ipv6-address
Command
install load system-package
Command
reboot
116