Checking The Connectivity To A Server; Accessing The Server - HP 6125XLG Configuration Manual

Blade switch fundamentals configuration guide
Table of Contents

Advertisement

Step
3.
Assign an IPv6 address
to the port.
Specify an IPv6 gateway
4.
for the port.
5.
Activate the port.
6.
Return to system view.

Checking the connectivity to a server

After completing network parameter configuration, you can use the ping command to check the
connectivity between the device and the intended FTP or TFTP server.
To check the connectivity between the device and a server on an IPv4 network, execute the following
command in any view:
Task
Check the connectivity to an IPv4 address
To check the connectivity between the device and a server on an IPv6 network, execute the following
command in any view:
Task
Check the connectivity to an IPv6 address

Accessing the server

In emergency shell mode, the device can:
Operate as an FTP or TFTP client to download software packages from an FTP or TFTP server.
Operate as an FTP or TFTP client to upload software packages to an FTP or TFTP server.
Operate as a Telnet or SSH client so you can log in to a server to, for example, view and manage
files on the server.
To access a remote IPv4 server, execute one of the following commands as appropriate in user view:
Task
Use FTP to download a file from or upload a file to
an IPv4 server.
Use TFTP to download a file from or upload a file to
an IPv4 server.
Telnet to an IPv4 server.
Command
ipv6 address ipv6-address prefix-length
ipv6 gateway ipv6-address
undo shutdown
quit
Command
ping [ -c count | -s size ] * ip-address
Command
ping ipv6 [ -c count | -s size ] * ipv6-address
Command
ftp server-ipv4-address user username password
password { get remote-file local-file | put local-file
remote-file }
tftp server-ipv4-address { get remote-file local-file | put
local-file remote-file }
telnet server-ipv4-address
115
Remarks
By default, the management
Ethernet interface has no IPv6
address.
By default, the management
Ethernet interface has no IPv6
gateway configured.
By default, the management
Ethernet interface is active.
N/A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents