HP 1032 Manual page 149

A contextual menu window appears with a right click on a node displayed in the central frame
of the main monitoring CMU window. The following menu options are available:
Telnet Connection
Launches a telnet session to this node. The telnet session is embedded in an
Xterm window.
Management Card Connection
Launches a telnet connection to the management card of this node. The
telnet session is embedded in an Xterm window. This assumes that the
management card property was properly set up during CMU installation. If
the node does not have any management card, this menu is inaccessible.
Locator On
Switches on the Locator LED of the node. This option is only available if
the node is an HP Integrity server with a properly registered ECI card.
Locator Off
Switches off the Locator LED of the node. This option is only available if
the node is an HP Integrity server with a properly registered ECI card.
Note:
If several nodes are selected, all the items of the contextual menu are
inactivated.
Back to Top
3.5.9 Logical Group Administration Menu
The Logical Group Administration item in the menu bar provides the following commands:
Select/Unselect
The user can select/unselect one or several nodes by a left click in the node
box in the central window frame. To select/unselect all the nodes in one
step, use the corresponding entry in the "Logical Group Administration"
menu.
Note: