HP 1032 Manual page 32

Clusterpack v2.4 tutorial
Table of Contents

Advertisement

console port on the MP card of each Compute Node.
When you are ready to run mp_register, use this command:
% /opt/clusterpack/bin/mp_register
Back to Top
Step 12 Power up the Compute Nodes
Background
The clbootnodes utility is intended to ease the task of booting Compute Nodes for the first time. To use
clbootnodes, the nodes' MP cards must have been registered and/or configured with mp_register.
Note:
clbootnodes can only be used to boot nodes to the language specification: English
The first time that HP-UX is booted after installation, it asks a series of questions:
What language to use
Hostname
Time and Timezone settings
Networking Configuration
Root password
Booting each node in a medium to large cluster can be a long and tedious task. clbootnodes automates the
processes to make it much faster and relatively free of user interaction. It is also possible to boot only
specified nodes using clbootnodes.
clbootnodes will gain console access by using telnet to reach the MP. clbootnodes uses a library called
Expect to produce the input needed to gain access to the console and step through the boot processes. The
are times when human intervention is necessary. In these cases, a message will be displayed explaining w
control is being returned to the user. The user can then interact with the MP/console and then return contr
to clbootnodes by pressing '~'. Control may be given to the user for the following reasons:
The MP is password protected
A LAN card choice was not specified to clbootnodes
The utility could not determine the state of the console
clbootnodes is intended to boot a node or nodes through the first boot sequence. It can generally be run at
any time to ensure that a node is booted and can usually recognize if the console represents an already
booted node. However, because a user can leave the console in any state, it is not always possible to
determine the state that a console is in. Because of this, use clbootnodes for booting nodes which are kno
to be in a "first boot" condition.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents