HP 1032 Manual page 7

Step Q7 Configure the ProCurve Switch
Select an IP address from the same IP subnet that will be used for the
Compute Nodes.
Connect a console to the switch
Log onto the switch through the console
Type 'set-up'
Select IP Config and select the "manual" option
Select the IP address field and enter the IP address to be used for the
switch
For more information, see the Comprehensive Instructions for this step.
References:
Step 7 Configure the ProCurve Switch
Back to Top
Step Q8 Copy the License Files to the Management Server
Put the files in any convenient directory on the Management Server (e.g. /tmp).
For more information, see the Comprehensive Instructions for this step.
References:
Step 8 Copy the License Files to the Management Server
Back to Top
Step Q9 Install ClusterPack on the Management Server
Mount and register the ClusterPack DVD as a software depot.
Install the ClusterPack Manager software (CPACK-MGR) using
swinstall.
Leave the DVD in the DVD drive for the next step.
For more information, see the Comprehensive Instructions for this step.