HP 1032 Manual page 60

To install a CPACK-FILES bundle on an individual compute node, or group of compute nodes,
the clsh utility can be used:
% /opt/clusterpack/bin/clsh -C <node(s)> "/usr/sbin/swinstall -s
<manager_ip>:/var/opt/clusterpack/depot <CPACK-FILES bundle
version>"
References:
3.1.5 clsh - Runs commands on one, some, or all nodes in the cluster.
1.5.4 Adding software bundles to Golden Images
Back to Top
1.5.4 Adding software bundles to Golden Images
Software bundles created with SD can be asociated with a Golden Image, and will be installed
on the compute nodes following an installation with that image. The software bundles should
be swcopy'd to /var/opt/clusterpack/depot. A list of all the bundels that are available in the
depot can be found using:e
% /usr/sbin/swlist -l bundle @ /var/opt/clusterpack/depot
The bundles are associated with an image using the sysimage_register command:
% /opt/clusterpack/bin/sysimage_register -i <image> -b <bundle>
The "-b bundle" option can be repeated on the command line to associate additional SD bundles
to the image. The bundles will remain associated with the image until sysimage_register is run
again. The bundle should include the full revision of the bundle (i.e. bundle,r=revision), to
avoid conflicts during installation.
Back to Top
Index | Administrators Guide | Users Guide | Tool Overview | Related Documents | Dictionary
Copyright 1994-2004 hewlett-packard company