HP 1032 Manual page 82

or
% bqueues -l <hostname>
For more information, see the man page:
% man bqueues
Common Terms
Both the Web interface and the CLI use the same terms for the health and status of the job
submission queues. These terms are used to define the State of an individual queue.
Open - The queue is able to accept jobs.
Closed - The queue is not able to accept jobs.
Active - Jobs in the queue may be started.
Inactive - Jobs in the queue cannot be started for the time being.
References:
3.7.8 How do I access the Clusterware Pro V5.1 Web Interface?
3.7.9 How do I access the Clusterware Pro V5.1 Command Line Interface?
Back to Top
1.7.3 Get details on health of specific Compute Nodes
Using the Clusterware Pro V5.1 Web Interface:
The Hosts Tab, located on the left hand side of the screen, contains a table showing
information about your hosts' resources. The "Detailed View" shows the current Stage and
Batch State. The Detailed View is accessed by selecting:
% View->Details
There are two different indications of health and status: State, and Batch State.
State refers to the state of the host.
Batch State refers to the state of the host, and the state of the daemons
running on that host. A detailed list of batch states is shown below.
For more information, select the online help:
Help->Platform Help
Using the Clusterware Pro V5.1 CLI: