HP 1032 Manual page 156

Organizations experience increased productivity from transparent single system, cluster-
as-server access to compute resources.
The Platform Computing's Clusterware Pro V5.1 solution dramatically reduces time to
market through continuous access to the cluster's compute power.
The Platform Computing's Clusterware Pro V5.1 solution enables organizations to
achieve higher quality results by running simulations and analyses faster than previously
possible.
The integrated resource management capability of the Platform Computing's Clusterware
Pro V5.1 solution minimizes cluster downtime and ensures maximum availability of the
compute resources used for critical design and research work.
Back to Top
3.7.2 How do I obtain and install the Clusterware Pro V5.1 license file?
Obtain a License File
If you have purchased ClusterPack Clusterware Edition, you will need a license for Platform Computing'
Clusterware Pro. You can call, email or fax your request to Hewlett-Packard Software Licensing Services
Refer to your Software License Certificate for contact information.
You will need to get the host identification number from the Management Server. The host ID can be fou
using the uname command:
% /bin/uname -i
The number returned by the command uname -i must be proceeded by a '#' when making your request. Fo
example, if uname -i returns 2005771344, provide the ID number as #2005771344 in your key request.
Note:
It may take up to 24 hours to receive the license file, depending on how the license request
is submitted. Please allow sufficient time to receive the license file before proceeding with
the installation of the ClusterPack software.
Install the license file
After you have received the Clusterware Pro license file, it must be installed on the Management Server.
This is normally done as part of manager_config. During manager_config, you will be asked to provide th
location of the license file. The license file will be copied into the correct location.
If I have a DEMO license file
By default, Clusterware Pro is configured to use a permanent license key. If you have received a DEMO
license file, you will need to install that file by hand. Detailed instrcutions are provided in:
/share/platform/clusterware/conf/README.demo