HP 1032 Manual page 39

Overview
Register the image.
Distribute the image to selected nodes.
Details
To distribute a Golden Image to a set of Compute Nodes, you need to first register the image. To register
image, use the command:
% /opt/clusterpack/bin/sysimage_register <full path of image>
If the image was created with sysimage_create, the full path of the image was displayed by sysimage_cre
Images are stored in the directory:
/var/opt/ignite/archives/<hostname>
To distribute the Golden Image to the Compute Nodes, use the command:
% /opt/clusterpack/bin/sysimage_distribute <full path of image> [ hostname |
all ]
The keyword "all" can be used to distribute the image to all of the Compute Nodes in the cluster, or a sing
hostname can be specified. sysimage_distribute will reboot each Compute Node for installation with the
specified image.
Back to Top
Step 20 Install and Configure the remaining Compute Nodes
Background
This tool is the driver that installs and configures appropriate components on every Compute Node.
Overview
Perform this process in the same way as configuring the first Compute Node.
References:
1.2.1 Comprehensive Installation Overview
Details
Use the following command to install and configure a Compute Node that received the Golden Image.
Perform this for all nodes. You can specify multiple nodes on the command line. You must place the opti