HP 1032 Manual page 160

% /share/platform/clusterware/lbin/cwagent stop
References:
3.1.5 clsh - Runs commands on one, some, or all nodes in the cluster.
Back to Top
3.7.6 How do I start and stop the Clusterware Pro V5.1 Web GUI?
The Web GUI is started and stopped as part of the tools that are used to start and stop the other Clusterwa
Pro V5.1 services. No additional steps are required.
Note:
The Clusterware Pro Web GUI is not automatically started during a reboot of the
Management Server. The Web GUI must be manually started if the Management Server is
rebooted.
References:
3.7.5 How do I start and stop the Clusterware Pro V5.1 daemons?
Back to Top
3.7.7 What system resources are required by Clusterware Pro V5.1?
The Clusterware Pro V5.1 web server is Tomcat. Tomcat is maintained and distributed by the Free Softw
Foundation. Several tools within the ClusterPack solution use the Tomcat web server.
Back to Top
3.7.8 How do I access the Clusterware Pro V5.1 Web Interface?
The Clusterware Pro V5.1 Web Interface can be accessed from any web browser that is connected to the
Management Server. The address is:
http://<management_server_name>:8080/Platform/
Where <management_server_name> is the full domain name of the Management Server.