System Information - NETGEAR WNAP210 User Manual

System Information

The System screen you access from the Monitoring tab provides a summary of the current
access point configuration settings, including current IP settings and current wireless
settings. This information is read-only, so any changes have to be made on other screens.
To access the System screen, select Monitoring > System.
This screen shows the following information:
Access Point Name. The NetBIOS name. The default name can be changed.
•
MAC Address. The MAC address of the access point's Ethernet port.
•
Country/Region. The domain or region for which the access point is licensed for use. It
•
might not be legal to operate this access point in a region other than one of those
identified in this field.
Firmware Version. The version of the firmware currently installed.
•
Current Time. The time setting for the access point.
•
IP Address. The IP address of the access point.
•
Subnet Mask. The subnet mask for the access point.
•
Default Gateway. The default gateway for the access point communication.
•
DHCP Client. Enabled indicates that the current IP address was obtained from a DHCP
•
server on your network. Disabled indicated a static IP configuration.
Access Point Mode. The operating mode of the access point: Access Point or
•
Point-to-point • Channel/Frequency. The channel the wireless port is using.
Rogue AP Detection. Shows whether the rogue AP detection feature is enabled.
•
ProSafe Wireless-N Access Point WNAP210
Monitoring
40